Показать сокращенную информацию

dc.contributor.authorВерещагин, М. Н.
dc.contributor.authorЗапускалов, М. Н.
dc.contributor.authorАгунович, И. В.
dc.date.accessioned2014-07-07T07:06:09Z
dc.date.available2014-07-07T07:06:09Z
dc.date.issued2008
dc.identifier.citationВерещагин, М. Н. Зависимость профиля ленты от некоторых технологических параметров процесса двухвалковой быстрой закалки -прокатки расплава / М. Н. Верещагин, М. Н. Запускалов, И. В. Агунович // Вестник ГГТУ им. П.О. Сухого: научно - практический журнал. - 2008. - № 2. - С.38-47.ru_RU
dc.identifier.issn1819-5245
dc.identifier.urihttp://elib.gstu.by/handle/220612/10373
dc.description.abstractЦелью данной работы является исследование влияния некоторых технологических параметров на профиль ленты при двухвалковом методе быстрой закалки расплава.ru_RU
dc.description.abstractThe relation of the strip contour and some technological parameters of the process of two- roll melt rapid quenching-and-rolling is considered. It is shown that nozzle geometry in two-roll melt rapid quenching is one of the most important factors influencing temperature distribution in a melt bath and heat profile of a roll sleeve. The nozzle length and melt flow rate increase results in the increase of inhomogenuity of flow and the loss of its longitudinal stability. The application of various methods of equalizing speed variations of the melt flow out of nozzle reduces the non-uniformity of temperature distribution in the bath, stabilizing the heat profile of the roll sleeve and contributing to producing an even strip. It is shown that the increase of the distributing nozzle length will decrease average temperature of the sleeve and facilitate its more uniform heating along the longitudinal axis. It has been established that optimization of the sleeve thickness, the diameter and the length of the roll will provide the improvement of the cross-section and planeness of the rapid quenched strip.
dc.language.isoruru_RU
dc.publisherГГТУ им. П.О.Сухогоru_RU
dc.titleЗависимость профиля ленты от некоторых технологических параметров процесса двухвалковой быстрой закалки -прокатки расплаваru_RU
dc.typeArticleru_RU
dc.identifier.udc621.7.014ru_RU


Файлы, содержащиеся в ресурсе

Thumbnail

Располагается в коллекциях:

Показать сокращенную информацию